ARKEDGE 1/24 AG-4 Gen2 Bluetooth RC Drift Gyro

AG-4 GEN2 is designed for 1:24 and 1:28 scale RC drift cars and supports both RWD and AWD setups.

Yes. AG-4 GEN2 supports Bluetooth tuning through the ARK EDGE App, available on both iOS and Android.

You can adjust Gyro Mode, Sensitivity / Gain, Steering Ratio, and Gyro Damping. Settings can be read from and written to the gyro through the app.

AG-4 GEN2 features 5 built-in gyro response modes, each using a different steering response curve to suit different chassis setups and driving preferences.

EPA (End Point Adjustment) defines the usable steering range of the chassis. AG-4 GEN2 supports independent adjustment of the Center, Left End Point, and Right End Point to ensure the gyro correctly recognizes the steering range.

Yes. Basic functions including EPA setup and mode switching can be performed directly using the physical SETUP button on the gyro.

Install the gyro on a flat and stable surface with the sensor facing upward. Keep it away from major vibration sources such as the motor.

Excessive chassis vibration can affect the gyro's sensor readings. If steering jitter or shaking occurs, check the mounting position and consider using softer or thicker double-sided tape to improve vibration isolation.

The operating voltage range is 4.8–6.0V.

The gyro measures just 21.6 × 13.3 × 7.5 mm and weighs 2.9 g including the case and PCB.